Outboard Covers to suit the range of Honda Outboards

We have made outboard covers to suit motors going back to 1970's from 2hp - 300hp, but if we don't have it we will let you know when ordering......if your outboard is within 10 years old we have done it 99.9% sure!

Outboard Covers Australia (OCA) have designed a range of covers that have been especially designed to suit the range of Honda outboard motors. Each cover from 2 - 225hp has had a pattern made to ensure each cover is a great fit and does not impede the performance of the motor in anyway. Please note that the Honda 2hp is air cooled so we don't make a Splash Cover for this motor.

As you are probably aware OCA make covers that are designed to suit a particular motor shape and size. So a 90hp Mercury will not fit a 90hp Honda as an example. When you buy a cover from OCA we have already made the pattern for that particular motor shape and size. All we need from you the customer is the engine model number of the motor.

Click here for leg measurement & ID plate details if you unsure of your motor year and leg length. To order simply click on the order button below to be taken to our fully secure order site.

 

" New Honda 75hp & 90hp V-Tec Splash Cover designed by OCA "
"Honda 175, 200 & 225hp motor pictured above"

" Honda 15/20hp Splash Cover in Lt. Grey with Blue Stripe "	" Honda 15/20hp Full Cover in Lt. Grey with Blue Stripe "

"Charcoal with a light grey stripe"	"Light Grey all over with black mesh at the air intakes"
"Splash® Cover to suit Honda 50hp"	"Splash® Cover to suit Honda 90hp"

"Full Cover with Splash 30hp"	" Full Cover 25 & 30hp"	"Splash® Cover 115 & 130"	"Splash® Cover 225hp"

WHAT IS OUR RECOMMENDED COLOUR SCHEME?? We would always recommend that you keep the motor roughly the same colour. Our closest match is our light grey which has a silver look about it. It does look a little white on some of the pictures, but the best comparision is the top shots of the 3 motors. Where do the colours go? Click here for more info.

What is the difference between a Splash Cover and a Full Cover and a Combo?

The Splash Cover is the small cover located on the cowling only that you can leave on the motor when it is on the water operating or when being towed or stored. It's designed to primarily protect the cowling from damage such as fishing lures, sinkers, burlee, bait sticking to the cowling and general wear and tear!

The Full Cover is designed to be used when either storing or towing at high speeds. This cover protects the motor from stone damage when towing and scratches etc when being stored. Propellas today are worth a small fortune, can you afford not to have yours covered up out of the site??? Another use we hear of commonly is protection against insects getting into the exhaust port and water intakes building nests and of course blocking of these major ports, which can be a major problem!

The Combo Cover is just our way of saying both of the above covers is a cheaper way to buy them rather than buying them individually. To give you an idea if you buy the *full cover for $290.00 you would pay $170.00 just for the cowling or Splash cover but if you buy them together at the same time we will sell them BOTH to you for $345.00 !!! Saving you around $115.00.
(*Example is based on a 40hp 2cyl 2stk motor covers only)