Outboard Covers Australia making outboard covers to suit Mercury & Mariner outboards

Mercury/ Mariner
Outboard Covers to suit the range of Mercury & Mariner Outboards

We have made outboard covers to suit motors going back to 1970's from 2hp - 300hp, but if we don't have it we will let you know when ordering......if your outboard is within 15 years old we have done it 99.9% sure!

Outboard Covers Australia have designed a range of covers that have been especially designed to suit the range of Mercury/Mariner outboard motors. Each cover from 2 - 300hp has had a pattern made to ensure each cover is a great fit and does not impede the performance of the motor in anyway.

As you are probably aware OCA make covers that are designed to suit a particular motor shape and size. So a 90hp Mercury will not fit a 90hp Johnson as an example. When you buy a cover from OCA we have already made the pattern for that particular motor shape and size. All we need from you the customer is the engine model number of the motor.

We offer 2 types of covers the full covers, which are suitable full use towing at high speed or simply for storing. The second cover we offer is called a Splash® Cover which has been designed to protect the cowling from minor damage when operating on or off the water. Yes you can leave this cover on when the motor is operating!!

Below are some of the covers we have made in the past.

SPECIAL OFFER IF YOU LIVE IN WA :
We are currently wanting to design a pattern for the latest model Mercury 40hp ONLY 3 cylinder 4 stroke 2007 or 2008 model (click here to see a picture of the motor we want) so if you have one and live in WA and would like a FREE Combo Cover (Full & Splash) valued at $375.00 for your trouble, just call us to arrange your motor to be dropped in for a day or two. Our factory address etc is in the Contact Us section of this web site. Remember only one motor is needed and this will be pulled down off the web site when we have the motor.

If you know someone that has one please get them to call us we would appreciate it!

Click on add to see more!

" NEW 2007 Mercury/Mariner - 75, 90 and 115hp Mercury 4 Stroke DFI"

" Black with Red Stripe (secondary colour)"
The new 25hp & 30hp 4 Stroke Covers have been created and ready for order!!!!


"The new Optimax 225hp G2 2007"


"New Optimax 115hp"	"Mercury 90hp Full Cover"	"Splash® Cover to suit 75hp"	"New 225hp Merc/Mariner 4 Stk"	"Optimax 75hp Splash® Cover"	"Mariner 140hp Splash® Cover"

"Full Cover on a 15hp"	"Splash® Cover on a 25hp 4stk"	"Splash® Cover on a 15hp"	" Mercury 50hp 3 Cylinder"	"Suits Mercury 225hp EFI & Carby model"	"Mariner 30hp Full Cover"
What is the difference between a Splash Cover and a Full Cover and a Combo? The Splash Cover is the small cover located on the cowling only that you can leave on the motor when it is on the water operating or when being towed or stored. It's designed to primarily protect the cowling from damage such as fishing lures, sinkers, burlee, bait sticking to the cowling and general wear and tear! The Full Cover is designed to be used when either storing or towing at high speeds. This cover protects the motor from stone damage when towing and scratches etc when being stored. Propellas today are worth a small fortune, can you afford not to have yours covered up out of the site??? Another use we hear of commonly is protection against insects getting into the exhaust port and water intakes building nests and of course blocking of these major ports, which can be a major problem! The Combo Cover is just our way of saying both of the above covers is a cheaper way to buy them rather than buying them individually. To give you an idea if you buy the full cover for $290.00 you would pay $170.00 just for the cowling or Splash cover but if you buy them together at the same time we will sell them BOTH* to you for $345.00 !!! Saving you around $115.00. (*Example is based on a 40hp 2cyl 2stk motor covers only)