Yamaha Outboard Motor Covers Australia making covers to suit the Yamaha range of outboard motors

Yamaha
Outboard Covers to suit the range of Yamaha Outboards

We have made outboard covers to suit motors going back to 1970's from 2hp - 350hp, but if we don't have it we will let you know when ordering......if your outboard is within 15 years old we have done it 99.9% sure!

Outboard Covers Australia have designed a range of covers that have been especially designed to suit the range of Mercury/Mariner outboard motors. Each cover from 2 - 350hp has had a pattern made to ensure each cover is a great fit and does not impede the performance of the motor in anyway.

As you are probably aware OCA make covers that are designed to suit a particular motor shape and size. So a 90hp Mercury will not fit a 90hp Johnson as an example. When you buy a cover from OCA we have already made the pattern for that particular motor shape and size. All we need from you the customer is the engine model number of the motor.

We offer 2 types of covers the full covers, which are suitable full use towing at high speed or simply for storing. The second cover we offer is called a Splash® Cover which has been designed to protect the cowling from minor damage when operating on or off the water.

Yes, you can leave the SPLASH cover on when the motor is operating & they are not made of vinyl so they don't sweat which will cause corrosion later on down the track!


*" New Yamaha F350 (350hp 4 stroke) Splash® Cover"*


" 50hp 4stk Full Cover "	" 150/175/200hp SWS 2 "	" 150/175/200hp Vmax HPDI "	" 60hp Combo Covers "

" 150hp 4stk Splash® "	" Combo Covers to suit 25hp"	" 200/225hp 4 stk Full Cover "	" 150hp 4stk Splash® "

" 115hp 4stk Splash® "	" 15hp 2stk Combo "	" 150/175/200hp 2stk Combo "	" 30hp triple carb 2stk Splash® "

" 80/100hp 4stk Splash® "	" 150/175/200hp 2stk Splash® "	" 115hp 4stk Splash® "	" 200/225hp 4stk Splash® "

" 200/225hp 4stk Splash® "	" 20hp 2stk Combo Covers "	" 150/175/200hp 2stk Splash® "	" 115/130/140hp 2stk Splash®"

Hot News about our Covers

" Now available ONLY from your local Yamaha Dealership, OCA made Splash® & Full covers with Yamaha Branding"

Please don't place an order for these branded covers through us, you need to place the order via your local Yamaha Marine dealership. Stocks should be available from your local dealer around 2nd week January 2008.
Pricing will NOT be the same as our pricing, but remember you are paying for the cost of the logos and shipping and warehousing etc. "This is a authorised genuine after market cover"

You can still purchase our OCA covers just not with the Yamaha branding on them!


" Yamaha Genuine F150hp Splash Cover "	" Yamaha Genuine F250 Splash Cover "

What is the difference between a Splash Cover and a Full Cover and a Combo?

The Splash Cover is the small cover located on the cowling only that you can leave on the motor when it is on the water operating or when being towed or stored. It's designed to primarily protect the cowling from damage such as fishing lures, sinkers, burley, bait sticking to the cowling and general wear and tear!

The Full Cover is designed to be used when either storing or towing at high speeds. This cover protects the motor from stone damage when towing and scratches etc when being stored. Propellers today are worth a small fortune, can you afford not to have yours covered up out of the site??? Another use we hear of commonly is protection against insects getting into the exhaust port and water intakes building nests and of course blocking of these major ports, which can be a major problem!

The Combo Cover is just our way of saying both of the above covers is a cheaper way to buy them rather than buying them individually. To give you an idea if you buy the *full cover for $290.00 you would pay $170.00 just for the cowling or Splash cover but if you buy them together at the same time we will sell them BOTH to you for $345.00 !!! Saving you around $115.00.
(*Example is based on a 40hp 2cyl 2stk motor covers only)